IBIS Quality Teleconference
April 22, 2003
TIME AND PHONE FOR NEXT MEETING
May 6, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-974-8478 or 800-249-5618
Meeting access: CONFERENCE SERVER 1, Conference ID: 54644
ROLL CALL
Adam Tambone adamt@maine.rr.com
*Barry Katz bkatz@sisoft.com
Benjamin P Silva benjamin.p.silva@intel.com
*Bob Ross bob@teraspeed.com
*Brian Arsenault arsenault_brian@emc.com
Eckhard Lenski Eckhard.Lenski@siemens.com
Eric Brock ebrock@sisoft.com
Gregory R Edlund gedlund@us.ibm.com
Hazem Hegazy hazem_hegazy@mentorg.com
John Figueroa jfigueroa@apple.com
*Katja Koller Katja.Koller@siemens.com
Kevin Fisher kfisher@sisoft.com
*Kim Helliwell kimgh@apple.com
Lance Wang lwang@cadence.com
Lynne Green lgreen@cadence.com
Mike Labonte milabont@cisco.com
Peter LaFlamme plaflamm@amcc.com
*Robert Haller rhaller@sisoft.com
Roy Leventhal Roy_Leventhal@3com.com
Sherif Hammad sherif_hammad@mentorg.com
Todd Westerhoff twesterh@cisco.com
Tom Dagostino tom@teraspeed.com
*Kazuyoshi Shoji kshohji@hitachi-ul.co.jp
*Sadahiro Nonoyama nonoyama@hitachi-ul.co.jp
Everyone in attendance marked by *
NOTE: "AR" = Action Required.
-----------------------MINUTES ---------------------------
Barry Katz chaired the meeting.
- Review of minutes for April 8, 2003
Minutes approved with no changes
- Announcements
EIA Call for Patent Disclosure
No company declared a patent.
Tentatively IBIS summit at DesignCon East
June 23rd 2003, Location Marlboro MA
- AR Review
AR - Barry and Bob update and post component section.- DONE
AR - Kim to obtain range of Ccomp values IBIS parser checks.- DONE
Parser issues a warning if outside range 0-1000pf
- Opens for new items
We expect to have draft documentation complete and compiled into one
document for DAC (JUNE). Barry will present IBIS Quality Committee
update at the DAC IBIS Open Forum.
- Detailed Documentation review
The latest component_section.txt (IQ_3_0_model_section.txt) was uploaded
to the web site.
Barry continued to walk us through the Model_section document
(IQ_4_0_model_section.txt). It is requested the responsible author be
present at phone calls to walk the group through the documentation.
Temperature and voltage descriptions look good, Minor editorial changes.
Removed External reference section. This has never been seen/used by
anyone on the team. The model section document has a number of updates
that need to be made including ramp sentence removed. Mike covered this
in waveform processing. Timing reference load information is missing.
[Cref,Rref, Vref, Vmeas]
AR - Bob Haller to insert relevant information from Timing reference
load Parser Bug submitted to open forum by IQ Committee into
Model_section document.
AR - Barry to contact Mike Labonte to inform him to attend in two weeks
to help review Waveform processing document.
This Waveform processing [Model Spec] document should be moved directly
after the Model_section [Model]
Bob walked the team through the IV_Curve document (IQ_4_3_iv_curve.txt).
Need to Add levels and Keywords. Numerous editorial changes. Proceeded
up to Pullup curves. Discussion on what to do if a model has excessive
currents. Deferred this discussion.
AR - Look at minutes to review previous IV curve checks for level 0.
AR - Bob Ross to dig up Table of legal IV curve combinations (from old
parser bug).
AR - Bob Haller update and post IV curve document.
- Plans for next meeting
Continue review of IV_Curves document
On deck - review of ramp_and_waveproc.doc
- Schedule for next meeting
May 6, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-974-8478 or 800-249-5618
Meeting access: CONFERENCE SERVER 1, Conference ID: 54644
Meeting ended at 10:00 AM Eastern Time.
--------------------------------------
Robert J. Haller (rhaller@sisoft.com)
Principal Consultant
Signal Integrity Software Inc.
6 Clock Tower Place, Suite 250
Maynard, MA 01754 Phone:
(978) 461-0449, ext 15